Avaya Configuring MPOA Services Bedienungsanleitung PDF herunterladen (Seite 49)

Customizing MPOA Services

305861-A Rev 00

3-3

Using Site Manager

To disable or reenable the MPOA service record, complete the following tasks:

Setting the MPS Address Generating Mode

By default, a newly created MPS automatically uses the 13-byte ATM address

domain that it receives from the network switch. In this default mode (automatic

address generation), the MPS also uses the MAC address of the underlying ATM

interface as the basis for the 7-byte user suffix of the MPS address.

You can alternatively configure a new MPS with an ATM address that you provide

in the MPOA service record. Whether derived automatically by MPOA or

manually from the MPOA service record, the address assigned to each MPS is its

control ATM address.

You can use the BCC or Site Manager to change the MPS address generation

mode from automatic to manual.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

MPOA Server Attributes

. The MPOA Service Record window

opens.

4. Set the

Enable/Disable

parameter. Click

Help

or see the parameter description

on page A-3.

5. Click on

Done

. You return to the Edit ATM Connector

window.

6. Click on

Done

. You return to the Select Connection Type

window.

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring MPOA Services Bedienungsanleitung Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring MPOA Services