Avaya Configuring WAN Lines Services Bedienungsanleitung PDF herunterladen (Seite 56)

100

101

Configuring WAN Line Services

2-8

308648-14.00 Rev 00

Configuring Clocking Signals

By default, the synchronous interface operates with an external clock source at

64102 b/s. You can configure the source and speed of synchronous timing signals

by:

• Setting the Clock Source

• Setting the Internal Clock Speed

• Setting the External Clock Speed

Setting the Clock Source

The Clock Source parameter specifies whether the origin of the synchronous

timing signals are supplied by the router (Internal) or by a network device

(External).

With this parameter set to Internal, the router supplies the required timing signals.

If you set the Clock Source parameter to Internal, set the Internal Clock Speed

parameter as described in “

Setting the Internal Clock Speed” on page 2-9.

With this parameter set to External (the default), an external network device

supplies the required timing signals. In most cases, you should set this parameter

to External. See “Setting the External Clock Speed” on page 2-10

Using the BCC

To set the clock source, navigate to the serial prompt (for example,

box

;

serial/2/1

) and type:

clock-source

variable

For example:

serial/2/1#

clock-source internal

serial/2/1#

clock-source external

Using Site Manager

See the Clock Source parameter on page A-72 for information.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 461 462

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring WAN Lines Services Bedienungsanleitung Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring WAN Lines Services