Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 138)

Configuring Frame Relay Services

3-68

117376-C Rev. 00

For example, the following command line sets a cir-in-minimum value of

10,000 bits:

svc-option/tronto# cir-in-minimum 10000

svc-option/tronto#

Traffic Shaping Control

To use traffic shaping for SVCs you set the

traffic-shaping-control

command to

enabled, but you also have these options:

• If you do not want to use traffic shaping on this SVC, accept the default,

disabled, and do not set the CIR, committed burst, and excess burst attributes.

• To use traffic shaping and accept the quality of service (QoS) the network

provides, set this attribute to enabled, and do not configure the CIR,

committed burst, and excess burst attributes.

• To use traffic shaping, and negotiate QoS with the network, set this command

to enabled, and also set the CIR, committed burst, and excess burst attribute

attributes.

• To prevent the router from enforcing the CIR, set this command to disabled,

and also set the CIR, committed burst, and excess burst attributes.

To set this command:

Navigate to the prompt for the SVC that you want to edit.

For example:

serial/1/2; frame-relay/1/2; service/8.0.32; svc-options/toronto

Enter the

traffic-shaping-control

command and set the value to

enabled

Legal values are

enabled

and

disabled

. The default is disabled.

For example, the following command line enables traffic shaping on this

SVC:

svc-option/tronto# traffic-shaping-control enabled

svc-option/tronto#

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 239 240

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 138