Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 93)

Customizing Frame Relay

117376-C Rev. 00

3-23

Configuring Congestion Control for an Interface

To configure congestion control for the interface you must first enable congestion

control, then optionally you can set a value for the congestion timer, congestion

counter, and the congestion method.

Congestion Control

Navigate to the frame-relay prompt.

For example:

box; serial/1/2; frame-relay/1/2

Enter the

congestion-control

command and the value

enabled

congestion-control enabled

For example, the following command line enables congestion control for this

frame relay interface:

frame-relay/1/2# congestion-control enabled

frame-relay/1/2#

Congestion Timer

To change the value for the congestion timer:

Navigate to the prompt for the interface that you want to edit.

For example:

box; serial/1/2; frame-relay/1/2

Enter the

congestion-timer

command and the value you want the

interface to use:

congestion-timer

is the length of time, in seconds, during which the router counts

congestion notifications (see “Congestion Counter

” on page 3-24). If the

router receives the number of congestion notifications you set in the

Congestion Counter during this amount of time, the router stops transmitting

data.

Legal timer values are 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, and 5 seconds. The

default is 1 second.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 239 240

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 93