Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 196)

Configuring Frame Relay Services

A-50

117376-C Rev. 00

Parameter: LL Core In Committed Burst

Path: Configuration Manager (select a connector) > Edit Connector window > Edit

Circuit > Services > Frame Relay Service List window > SVCs > Add

Default: 0

Options: 0 to 21447463647 b/s

Function: Specifies the incoming committed burst size. This is the maximum number of

bits that a VC can receive during the VC’s burst period (Tc) when congestion is

occurring. To enable traffic shaping, the Burst parameters and the Throughput

parameters (CIR) must both be greater than zero. The Core In Committed Burst

(Bc) value should be lower than the Core In Throughput value.

Instructions: Choose a value appropriate to your network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.10.1.25

Parameter: LL Core Out Excess Burst

Path: Configuration Manager (select a connector) > Edit Connector window > Edit

Circuit > Services > Frame Relay Service List window > SVCs > Add

Default: 0

Options: 0 to 21447463647 b/s

Function: Specifies the outgoing excess burst size. This value is added to the Core Out

Committed Burst value to determine the maximum number of bits that may be

transmitted during the VC’s burst period when there is no congestion. The Core

Out Excess Burst plus the Core Out Committed Burst must be less than or equal

to the line speed.

Instructions: Choose a value appropriate to your network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.10.1.26

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 239 240

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 196