Avaya Configuring BayStack Remote Access Bedienungsanleitung PDF herunterladen (Seite 131)

Using the Quick-Start Local Boot Procedure

308614-14.00 Rev 00

C-15

Using your completed Quick-Start worksheets, enter the appropriate

network information in response to the prompts.

The BayStack router uses this information to configure interfaces to the

network.

The script prompts you for information in this order:

• The initial Global Information worksheet information

• Specific protocol information

• Wide area protocol selection

• Specific protocol information

• The rest of the Global Information worksheet information

After you enter all of the Global Information worksheet and protocol

information, the script displays a configuration summary and prompts you to

save the configuration to a file.

Save the configuration file.

Table C-1. Quick-Start Commands

Task Action Details

Accept a default

value

Press [Return] Your console displays default values in

brackets; for example, [E11].

Repeat a step (for

example, if you make

a mistake)

Press [Control]-c;

then, type

When you press [Control]-c, the script

prompts Terminate script y/n? Type

to return to the beginning of the step so that

you can reenter the information.

Stop the Quick-Start

procedure

Press [Control]-c;

then, type

When you press [Control]-c, the script

prompts Terminate script y/n? Type

to terminate the procedure and return to the

Technician Interface prompt.

To restart the Quick-Start procedure, reboot

the router by entering

boot

Note:

If the BayStack router will use a routine startup procedure other than

Directed Netboot, be sure to name the configuration file config.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 131

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Avaya Configuring BayStack Remote Access