Avaya Configuring BayStack Remote Access Bedienungsanleitung PDF herunterladen (Seite 94)

Configuring BayStack Remote Access

A-8

308614-14.00 Rev 00

BootP Client Interface Address Parameters

Parameter: IP Address

Path: Configuration Manager > Protocols > IP > BOOTP >

Relay Agent Interface Table > Client I/F > Add

Default: None

Options: Any valid IP address

Function: Specifies the IP address of the BayStack router that is using EZ-Install. This

parameter applies only to a Frame Relay PVC in group access mode.

Instructions: Specify the IP address (in dotted-decimal notation) of the BayStack router

interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.1.1.1.3

Parameter: DLCI Number

Path: Configuration Manager > Protocols > IP > BOOTP >

Relay Agent Interface Table > Client I/F > Add

Default: None

Options: 16 to 1007

Function: Specifies the identification number of the upstream router’s PVC. The Frame

Relay network uses the DLCI number to direct data from the BayStack router to

the upstream router.

Instructions: Specify the number in decimal format. Use the DLCI number assigned by your

Frame Relay service provider.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.1.1.1.2

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 139 140

Keine Kommentare

Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 94