Avaya Configuring BayStack Remote Access Bedienungsanleitung PDF herunterladen (Seite 75)

Configuring Netboot Client Services

308614-14.00 Rev 00

4-7

Configuring an Ethernet Interface for Network Booting

To configure an Ethernet interface for network booting, enter the following

command at the Technician Interface or AN Monitor prompt:

ifconfig

[

-d

]

[

<IP_address> <subnet_mask>

[

<next_hop_address>

]]

Table 4-3 describes the

ifconfig

command options for configuring the BayStack

router’s Ethernet interface.

Note:

The Ethernet interface must be configured with IP to support netboot

options.

Table 4-3. ifconfig Command Options for an Ethernet Interface

Option Description

-d

Resets the BayStack router’s IP interface options to the default values.

Resetting an Ethernet interface makes it inactive in the network

booting process. (The output of the

getcfg

command shows the

default as None.)

Specifies the IP connector you are configuring. Use the format

xcvr

port_no.

<IP_address>

Specifies the IP address of the interface you set with

Provide this address in dotted-decimal notation.

<subnet_mask>

Specifies the IP subnet mask of the interface you set with

Provide this address in dotted-decimal notation.

<next_hop_

address>

Specifies the IP address of the next-hop router. Provide this address in

dotted-decimal notation. Specify this address only if there are

intermediate routers between the BayStack router and the BootP

server.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 75

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Avaya Configuring BayStack Remote Access