Avaya Configuring BayStack Remote Access Bedienungsanleitung PDF herunterladen (Seite 40)

Configuring BayStack Remote Access

1-22

308614-14.00 Rev 00

Local Boot

Complete the following steps for the Local Boot option:

Complete the Quick-Start configuration worksheets. (See Appendix C.)

The person at the BayStack router site establishes a Technician Interface

session, or you establish a session using a modem. (See the hardware

installation guide.)

If you are not at the BayStack router console, provide the person at the

console with the information in the configuration worksheets. The hardware

installation guide contains duplicate worksheets. (See Appendix C.)

The person at the BayStack router console runs the installation script

(install.bat for the AN/ANH and inst_arn.bat for the ARN), using the

information provided in the worksheets you completed in step 1. (See

Appendix C and your hardware installation guide.)

The installation script records the responses in a configuration file.

(See Appendix C and your hardware installation guide.)

If the configuration file meets your network requirements, the BayStack

router starts bridging and routing traffic.

Use the Site Manager Statistics Manager and Events Manager tools to verify

that the BayStack router is routing traffic as specified in the configuration file.

(See Configuring and Managing Routers with Site Manager.)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 139 140

Keine Kommentare

Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 40