Avaya Configuring BayStack Remote Access Bedienungsanleitung PDF herunterladen (Seite 74)

Configuring BayStack Remote Access

4-6

308614-14.00 Rev 00

Table 4-2. ifconfig Command Options for a Serial Interface

Option Description

-d

Resets the BayStack router’s IP interface options to the default values.

This option tries four WAN configurations in the following order, until it

finds the correct type for the router’s connection to the network:

1. Nortel Networks HDLC encapsulation (also called

Nortel Networks Standard PPP) with external clocking

2. Frame Relay Annex D

3. Frame Relay LMI

4. Frame Relay Annex A

-fr

Configures the BayStack router’s serial port as a frame relay

connection. With this option, use one of the following options to

specify a DLCMI option:

-annexd

-annexa

, or

-lmi

-annexd

-annexa

-lmi

When one of these options is used with the

-fr

option, it specifies a

DLCMI option. Use the same option as the network to which the

BayStack router’s Frame Relay interface is connected. The default

option for Frame Relay is

-annexd

-int_clk

Sets the serial port to internal clocking at 1.25 MB/s. If you do not

specify this option, the router defaults to external clocking.

Specifies the IP connector you are configuring. Use the format

com

<port_no.>

<IP_address>

Specifies the IP address of the interface you set with

Provide this address in dotted-decimal notation.

<subnet_mask>

Specifies the IP subnet mask of the interface you set with

Provide this address in dotted-decimal notation.

<next_hop_

address>

Specifies the IP address of the next-hop router. Provide this address

in dotted-decimal notation. Specify this address only if there are

intermediate routers between the BayStack router and the BootP

server.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 74

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Avaya Configuring BayStack Remote Access