Avaya Configuring BayStack Remote Access Bedienungsanleitung PDF herunterladen (Seite 62)

Configuring BayStack Remote Access

3-8

308614-14.00 Rev 00

Adding a Netboot or Directed Netboot Interface

When you enable Netboot or Directed Netboot, you must add (and configure) at

least one BayStack router circuit as a Netboot interface. If you are using

EZ-Install, you do not need to configure Netboot interfaces. You can use Site

Manager to add a Netboot interface.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

Global Protocols

. The Global Protocols menu opens.

3. Choose

Net Boot

. The Net Boot menu opens.

4. Choose

Interfaces

. The Netboot Interfaces window opens.

5. Click on

Add

. The Netboot Interface window opens.

6. Set the

Connector

parameter.

Click on

Help

or refer to the parameter

description on page A-4.

7. Click on

. You return to the Netboot Interfaces

window, which shows the interface you

just added.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 139 140

Keine Kommentare

Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 62