
Media Processing Server System Operator’s Guide
Page 148 # P0602484 Ver: 2.7
Did /usr/sbin/ufsdump 0cf /dev/rmt/0n /dev/md/rdsk/d25
bringing /opt /dev/md/dsk/d25 back online to /dev/md/dsk/d5
d5: submirror d25 is onlined
Did /usr/opt/SUNWmd/sbin/metaonline /dev/md/dsk/d5 /dev/md/dsk/d25
Locking /usr
Did /usr/sbin/lockfs -w /usr
taking /usr /dev/md/dsk/d26 offline from /dev/md/dsk/d6
d6: submirror d26 is offlined
Did /usr/opt/SUNWmd/sbin/metaoffline /dev/md/dsk/d6 /dev/md/dsk/d26
unlocking unmirrored /usr
Did /usr/sbin/lockfs -u /usr
Dumping /usr /dev/md/rdsk/d26.......please wait......
Did /usr/sbin/ufsdump 0cf /dev/rmt/0n /dev/md/rdsk/d26
bringing /usr /dev/md/dsk/d26 back online to /dev/md/dsk/d6
d6: submirror d26 is onlined
Did /usr/opt/SUNWmd/sbin/metaonline /dev/md/dsk/d6 /dev/md/dsk/d26
Backup done....rewinding.....
4. If the following message is received, then the current tape is full. Eject the
tape (and label according to the next step), insert a new tape and then
respond yes to the following prompt:
DUMP: NEEDS ATTENTION: Is the new volume (#2) mounted on
`SYSTEMNAME:/dev/rmt/0n' and ready to go?: ("yes" or "no") yes
5. After the tape rewinds, eject it and write the date, sequence number, and
number of tapes in this backup set, on the label. For example, write:
• [today’s date] mirrorbu 1 of 1 (when everything fits on a single tape).
or
• [today’s date] mirrorbu 1 of 2 (on first tape) and
[today’s date] mirrorbu 2 of 2 (on second tape).
• Write the filesystem order on the external tape label. This helps identify
the correct filenumber when restoring. The mirrorbu screen output, as
well as the mirrorbu.out file corresponding to this dump, shows the
order of filesystems on the dumptape.
6. The system drive backup is now complete, however, it may take some
time to complete synchronizing the re-attached mirrors. Do not reboot the
system and do not perform another system backup until the synchroniza-
tion is complete. This can be checked with the command:
# /usr/opt/SUNWmd/sbin/metastat | grep sync
Sample output:
State: Resyncing
Resync in progress: 33 % done
Intermittently execute the above metastat command until grep finds no
match for sync.
Kommentare zu diesen Handbüchern