Avaya Media Processing Server System Bedienungsanleitung PDF herunterladen (Seite 38)

Media Processing Server System Operator’s Guide

Page 38 # P0602484 Ver: 2.7

AUDIO Monitor Jack

The AUDIO monitor jack is used to monitor a single phone line. A

telephone handset is connected and the desired line can be monitored using the ccm

listen command (see the Avaya Media Processing Server Series System Reference

Manual for more information). Only one side of the

conversation can be monitored at a time.

Use call monitoring (listening to actual calls) only to confirm

that caller/Media Processing Server interaction is going

smoothly and that the Media Processing Server is operating

properly. Check applicable laws relating to privacy of

conversations before listening to calls.

Ethernet Hub Indicators

The dual green and red LED indicators for HUB A and HUB B on the front of the

TMS can display five separate conditions. The LEDs can either

be lit continuously or blinking in the following combinations to

indicate a particular condition.

DCC Front Panel

Span connector RJ48M 50-pin connector connects up to eight digital spans

(T1 or E1) to PSTN.

Remote terminal connector RS232 (9-pin DIN) port for connecting a debug terminal.

Used for boot ROM and diagnostics.

Other connectors and

indicators

Reserved for future enhancement.

TMS Front Panel Connectors and Indicators (Continued):

Item Description

Ethernet Hub Status Indicators

Indication

Conditions

EXT, SLx, MP COL

Steady green Receive link pulse FIFO error

Blinking green (@~ 4Hz) Transmit packet (N/A)

Steady red Reversed polarity Collision

Blinking red (@~ 4Hz) Receive packet (N/A)

Alternating red and green (@~ 5Hz) Partitioned out (N/A)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 187 188

Keine Kommentare

Avaya Media Processing Server System Bedienungsanleitung Seite 38