
10-2 Resolving Problems
Troubleshooting
Resolving Problems 10
Use the following guidelines to investigate and correct errors:
1. Scan through the Problem column to find the description of the problem
that you have encountered.
2. In the Probable Cause column, one or more problem descriptions are
offered. Select the one that best describes the observable condition.
3. Perform the corresponding task in the Action column.
Starting/Connecting Problems
Problem Probable Cause Action
Attempted to start
Server software.
Software “froze.”
Machine name was
changed in Control
Panel/Network
Identification/Computer
Name.
Reinstall BCMS Vu Server
software. (You do not have
to first uninstall it.)
Can’t start BCMS Vu
Server except in
simulator mode.
Hardware key was not
installed before BCMS Vu
Server software was
started.
Attach hardware key and
restart BCMS Vu Server
software. Refer to the
Installation Guide and
instructions that
accompany the hardware
key.
DEFINITY system
connection test does not
pass. Cannot connect to
DEFINITY system.
The data module is being
used to connect to the
switch and the wrong
cable is being used to
connect the PC to the
data module.
Use the correct cable.
The data module is being
used to connect to the
switch and the cable
between the PC and data
module is not connected
properly.
Properly connect the cable
between the PC and data
module. Refer to Chapter 3,
“Installing the Data Module
and Hardware Key” in
BCMS Vu Software R2 V2
Installation Guide.
Kommentare zu diesen Handbüchern