
10-46 Troubleshooting the Data Module
Troubleshooting
13. Press the Enter key again.
If nothing happens repeat steps 9 through 12.
14. Enter atd<extension>
where <extension> is the hunt group number. In the following example it
is 4444.
15. When the “HyperTerminal” window resembles the following
illustration,
press <Enter>.
A Login prompt appears.
Note
If you chose a COM Port in step 6 that is being used by your PC, but
is not attached to the data module, you cannot type in the
“HyperTerminal” window. Check the cabling between the PC and
the data module and between the data module and the DEFINITY
system. Exit HyperTerminal and restart it before testing the next COM
Port.
Kommentare zu diesen Handbüchern