
Configuring Dial Services
A-24 114062 Rev. B
Parameter: BRI Line Type
Path: ISDN Connector > ISDN Dialup > Edit D Chan >
BRI Interface Configuration
Default: PTP
Options: PTP
| MTP
Function: Indicates whether you have a point-to-point (PTP) or multipoint (MTP)
configuration on the BRI line.
Instructions: If you have a PTP line connected to a 5ESS switch, you do not have to
configure SPIDs. (Refer to the SPID
parameter on page A-86.)
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.33
Parameter: X.25 over ISDN-D Channel
Path: ISDN Connector > ISDN Dialup > Edit D Chan >
BRI Interface Configuration
Default: Disable
Options: Enable
| Disable
Function: Enables or disables X.25 service over the D channel for each BRI line.
Instructions: Select Enable to enable this feature. Otherwise, accept the default.
CAUTION: If you enable or disable this feature dynamically, the router
disconnects all existing calls over the B channels as the ISDN software makes
changes for the feature. Once the changes are complete, the software restarts
and you can make calls again.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.39
Kommentare zu diesen Handbüchern