
Configuring Dial Services
B-8 114062 Rev. B
If you are using selective PRI service (that is, some B channels are blocked), the
timeslots that you configure as B channels should be the same channels assigned
by the switch provider. For example, if the provider assigns you channels 1 to 10,
configure timeslots 1 to 10 as B channels.
The PRI Logical Lines window appears automatically. Accept the default values.
Demand Pool Configuration
Path: Dialup > Demand Pools
After entering a demand pool ID, the Demand Lines Definition window appears
automatically. Click on either the MCT1-2 connector (Router 1) or the ISDN1
connector (Router 2). Site Manager automatically displays the ISDN Switch
Configuration window.
Path: Demand Lines Definition > ISDN Switch Configuration
The ISDN Logical Lines window appears next. Accept the default values.
Table B-10. Demand Pools Parameter
Parameter
Router 1
(MCT1-2)
Router 2
(ISDN1)
Pool ID 1 1
Table B-11. ISDN Switch Configuration Parameter
Parameter
Router 1
(MCT1-2)
Router 2
(ISDN1)
Switch Type PRI 5ESS NI1
Kommentare zu diesen Handbüchern