
Configuring Dial Services
A-104 114062 Rev. B
Parameter: PAP Password
Path: Dialup > Caller Resolution Table > Add > Caller Name and Secret/Password
Default: None
Options: Any text string; maximum of 25 characters
Function: Specifies the PAP password you assign to this interface. The PAP password is
for identification and security purposes, and must be the same on both sides of
the connection.
During the authentication phase, all Password Authenticate-Request messages
that the calling router sends to the called router must include the correct
password. If the password is not correct, the called router sends an
Authenticate-Negative Acknowledgment (Authenticate-NAK) message and the
calling router does not activate the connection.
Instructions: If you configured PAP as the authentication protocol, specify a unique PAP
password. If not, ignore this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.3.1.5
Parameter: Local Circuit
Path: Dialup > Caller Resolution Table
Default: None
Options: Available demand, primary, or bandwidth circuit
Function: Identifies a previously configured demand, primary, or bandwidth circuit. You
assign this circuit to a remote router, which you specify in the Caller Name
parameter. When the local router receives a call from the remote router, it
matches the remote router’s CHAP name or PAP ID with a caller name in the
caller resolution table. The router then activates the circuit assigned to that
remote router.
If you enter a value for this parameter, you cannot enter a value for the Local
Group parameter.
Instructions: Select a circuit from the Local Circuit List window. Site Manager automatically
supplies the value for this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.3.1.3
Kommentare zu diesen Handbüchern