Avaya BCM 4.0 Networking Konfigurationsanleitung PDF herunterladen (Seite 115)

100

101

Chapter 6 Configuring resources — media bay modules 115

BCM 4.0 Networking Configuration Guide

4 Select the service you want to change.

A configuration panel appears in the right frame. See Figure 28.

5 Table 23 shows the possible settings for the services.

Figure 28 Translation Mode

Table 23 Module record values

Attribute Value Description

Translation

Mode

None

All

By SID

By Number

Define how the system maps incoming digits for this service type to the line

number within the system.

In all cases, the received digits are used to find a target line or to activate

remote access.

Default: None

Translation mode value definitions: None: No mapping is applied. The last digits of the Called Party Number

which match the Received Number Length setting are used as received

digits. Note that if there is no called party number (may occur with some FX

calls) the call will ring at the incoming trunk prime set.

All: Allows you to define the received digits used for all calls with this service

type, regardless of the called party number or service identifier (SID). For this

option, all calls with this service type on this PRI will ring the same target line.

Depending on the service type and the protocol, you may be able to map the

called party number (By number) and the service identifier (SID).

By SID: Allows you to associate different received digits with different calls of

this service type based on the service identifier.

By Number: Allows you to associate different received digits with different

calls of this service type based on party number.

Note: Any calls that do not match any entry defined in the map table will ring

at the prime set.

Map Table Select Add on the

Map Table screen to

create a new map

entry

From digits

To digits

Enter the incoming line number to the internal line number, such as the target

line.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 757 758

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM 4.0 Networking Konfigurationsanleitung Seite 115

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya BCM 4.0 Networking