Avaya BCM 4.0 Networking Konfigurationsanleitung PDF herunterladen (Seite 58)

100

101

58 Chapter 2 System telephony networking overview

N0060606N0060606

When the features are activated, users can:

• display a call charge

• redirect calls over the ETSI ISDN BRI/PRI line to the outside network

• tag malicious calls

Advice of Charge-End of Call (AOCE) — AOCE is a supplementary service available from your

service provider on ETSI ISDN BRI/PRI links. This feature allows the BCM user to view the

charges for an outgoing call once the call completes. This information is also reported to the Call

Detail Reporting Application. The information can be provided in currency or charging units,

depending on how the feature is set up by your service provider.

To invoke the feature, the user presses FEATURE 818.

DPNSS 1 services

The Digital Private Network Signaling System (DPNSS 1) is a networking protocol enhancement

that extends the private networking capabilities of existing BCM systems. It is designed to offer

greater centralized functionality for operators, giving them access to BCM features over multiple

combined networks.

Refer to the following topics:

• “DPNSS 1 capabilities”

• “DPNSS 1 features” on page 59

• “Private networking with DPNSS” on page 65

DPNSS 1 allows a BCM local node, acting as a terminating node, to communicate with other

PBXs over the network. For example, corporate offices separated geographically can be linked

over DPNSS 1 to other BCM nodes, bypassing the restrictions of the PSTNs to which they may be

connected. This allows connected BCM nodes to function like a private network, with all features

of BCM accessible.

DPNSS 1 features can be used on any BCM telephone. On most BCM telephones, you must use

specific keys and/or enter a number code to access the features.

DPNSS 1 capabilities

A single BCM node, acting as a terminating node on the network, supports the following

capabilities over DPNSS 1 lines:

• Direct Dial Inward (DDI) for incoming calls.

Note: The DPNSS feature is dependent on which region is loaded on your

system at startup and requires that a software keycode was entered to enable

the feature. The feature also requires a DTM-based connection.

Note: BCM DPNSS 1 works as a terminating node only. BCM to BCM

DPNSS is not supported.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 757 758

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM 4.0 Networking Konfigurationsanleitung Seite 58

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya BCM 4.0 Networking