Avaya BCM 4.0 Networking Konfigurationsanleitung PDF herunterladen (Seite 673)

100

101

Chapter 68 Virtual Private Networks (VPN) 673

BCM 4.0 Networking Configuration Guide

5 Click the Remote Accessible Network you want to delete.

6 Click Delete.

A message prompts you to confirm the deletion. See Figure 211.

7 Click Yes .

Creating a tunnel between two BCMs

The following is an example of a how to connect two BCM systems together using an IPSec

tunnel.

In this example, the IPSec tunnel connects a BCM with a LAN 2 IP address of 10.10.11.1 and

another BCM with a LAN 2 IP address of 10.10.11.2. LAN 1 on the first BCM is on the subnet

12.12.12.0. The LAN 1 of the second BCM is on subnet 14.14.14.0.

Configuring the first BCM

1 Click Configuration > Data Services > IPSec VPN

2 Click the Global Settings tab.

3 Select the Enable IPSec check box.

4 Click the Branch Office Tunnels tab.

5 Click Add.

The Add Branch Office Tunnel panel appears.

6 Set the Tunnel name to Example.

7 Set the Local Endpoint to 10.10.11.1.

8 Set the Remote Endpoint to 10.10.11.2.

9 Set the Pre-shared key type to Text.

10 Set the Pre-shared key to 123.

11 Click OK.

A confirmation box will appear prompting you to re-enter the Pre-shared key

Re-enter your Pre-shared key and click OK to save.

12 Click OK on the Add Branch Office Tunnel panel

13 Select the Branch Office Tunnel you just created.

The details panel appears.

14 Click the Local Accessible Networks tab.

15 Click Add.

The Add Local Accessible Network panel appears.

16 Set the IP Address to 12.12.12.0 with Subnet mask 255.255.255.0.

Click OK.

17 Click the Remote Accessible Networks tab.

1 2 ... 668 669 670 671 672 673 674 675 676 677 678 ... 757 758

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM 4.0 Networking Konfigurationsanleitung Seite 673

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya BCM 4.0 Networking