Avaya Configuring IP Services Bedienungsanleitung Seite 144

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 415
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 143
Configuring IP Services
5-14 114065 Rev. A
Configuring OSPF on an IP Interface
The following sections describe features that you can configure on an OSPF
interface.
Enabling and Disabling OSPF
When you add OSPF to an IP interface, OSPF is automatically enabled on that
interface. The interface will be advertised as an internal route. In addition, the
interface can be used to form a neighbor relationship.
You can use Site Manager to disable and re-enable OSPF on an interface.
Each OSPF interface on the router provides access to one area in the OSPF
domain. By default, OSPF assumes that each interface provides access to the
backbone area.
Configuring an Area ID
In an AS that contains multiple areas, each OSPF interface is configured with the
ID of the area to which it is connected.
In
Figure 5-1, for example, R5 is an internal router in Area 0.0.0.1. Each of its
interfaces is attached to a network in that area. Therefore, each interface is
configured with area ID 0.0.0.1.
By default, OSPF assigns area ID 0.0.0.0 (the backbone ID) to each interface.
You can use Site Manager to assign an area ID to an OSPF interface.
Site Manager: Enable parameter: page A-78
Site Manager: Area ID parameter: page A-78
Seitenansicht 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 414 415

Kommentare zu diesen Handbüchern

Keine Kommentare