Avaya Configuring IP Services Bedienungsanleitung Seite 384

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 415
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 383
Configuring IP Services
C-16 114065 Rev. A
Parameter: Preference
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Import
Filters
Default: 1
Options: 1 to 16
Function: Assigns a weighted preference value to a route included in the routing tables. If
confronted with multiple routes to the same destination, the router, by default,
grants preference to routes in the following order: direct, OSPF internal,
BGP-3, static, OSPF, external, and RIP. If Intra-AS IBGP routing is used, then
any other route source is preferred over a BGP-3 route.
Instructions: If this hierarchy is acceptable, accept the default value 1 for preference. If you
want to grant preference to this BGP-3-derived route, assign a new preference
value in the range of 1 to 16 (the greater the number, the higher the preference).
The default preference for static routes is 16, but may be set to any value
between 1 and 16. If you want to grant a BGP-3-derived route preference over
a static route, make sure the preference you assign to the BGP-3-derived route
exceeds the preference value of the static route you want it to override. Either
accept the default value, 1, or enter a new value. Routes for all networks
(0.0.0.0/0.0.0.0) should have the lowest preference. Routes for the most
specific networks (longest address and mask) should have the highest
preference.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.14.1.11
Parameter: BGP-3 Preference
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Import
Filters
Default: 1
Options: 1 to 2147483647
Function: Assigns a weighted precedence value to a route included in the routing tables.
If confronted with multiple BGP-3 routes to the same destination, the router,
by default, grants preference to routes assigned the highest preference value.
Instructions: Either accept the default value, 1, or enter a new value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.14.1.12
Seitenansicht 383
1 2 ... 379 380 381 382 383 384 385 386 387 388 389 ... 414 415

Kommentare zu diesen Handbüchern

Keine Kommentare