
Site Manager Parameters
114065 Rev. A A-81
Parameter: Hello Interval
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: 10 seconds
Options: 1 to 65,535 seconds
Function: Indicates the number of seconds between the hello packets that the router
sends on the interface. Although the default value is 10 seconds, we suggest
the following values for this parameter: for broadcast, 10 seconds; for
point-to-point, 15 seconds; for NBMA, 20 seconds; for point-to-multipoint,
15 seconds.
Instructions: Either accept the default value of 10 seconds or set the hello interval to some
higher number for slower-speed serial lines. This value must be the same for
all routers attached to the same network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.11
Parameter: Dead Interval
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: 40 seconds
Options: 1 to 2147483647 seconds
Function: Indicates the number of seconds that a router’s hello packets have not been
seen before its neighbors declare the router down. The dead interval value
should be some multiple of the hello interval value. We suggest the following
values for this parameter: for broadcast, 40 seconds; for point-to-point, 60
seconds; for NBMA, 80 seconds; for point-to-multipoint, 60 seconds.
Instructions: Either accept the default value of 40 seconds or set the dead interval to some
higher number for slower-speed serial lines. This value must be the same for
all routers attached to the same network
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.12
Kommentare zu diesen Handbüchern