Avaya Configuring IP Services Bedienungsanleitung Seite 85

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 415
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 84
Customizing IP Services
114065 Rev. A 3-21
Disabling UDP Checksum Processing on the Interface
By default, UDP checksum processing is enabled on this interface. All outgoing
and incoming UDP datagrams are subject to checksumming.
You can use Site Manager to disable UDP checksum processing.
You should use the default in virtually all instances. Disable UDP checksum
processing to provide backward compatibility with UNIX BSD 4.1.
Specifying a MAC Address or E.164 Address
You can use Site Manager to specify a MAC address or an E.164 address for this
interface.
To configure this parameter for a multinet or multigroup configuration, refer to
Configuring SMDS.
Site Manager: Checksum parameter: page A-29
Site Manager: MAC Address parameter: page A-29
0 The IP router uses its IP address and the circuit’s MAC address when
transmitting packets on this interface.
A user-specified
MAC address
The IP router uses its IP address and this MAC address when
transmitting and receiving packets on this interface.
An E.164
address.
If the interface is on an SMDS circuit, by default, IP uses the individual
SMDS-configured address. You can enter the entire E.164 address—
for example, C1 617 555 5000 FFFF.
Seitenansicht 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 414 415

Kommentare zu diesen Handbüchern

Keine Kommentare