Avaya Configuring IP Services Bedienungsanleitung Seite 299

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 415
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 298
Site Manager Parameters
114065 Rev. A A-83
Parameter: Password
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: None
Options: Any ASCII string up to eight characters long
Function: Specifies the password used for this area. You can specify a password up to
eight ASCII characters in length that will appear in the authentication field of
all OSPF packets across this interface. This parameter is valid only when
Authentication Type is set to Simplepassword.
Instructions: Enter the appropriate password. All routers in the same area must either have
no authentication or have the same password.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.17
Parameter: MTU Size
Path: Configuration Manager > Protocols > IP > OSPF > Interfaces
Default: 1
Options: 1
| 2 | a number up to 10,000
Function: Specifies the maximum transmission unit (MTU) size of OSPF updates on this
interface.
Instructions: Accept the default value, 1, to use the IP MTU size for that physical interface.
Enter 2 to send packets no larger than the IP MTU size for Ethernet (1500).
Enter a number up to 10,000 to specify an MTU size directly; the number you
enter must be less than the IP MTU size for that physical interface. When
running OSPF over a synchronous/PPP link, set the MTU size to a value less
than the sync MTU size (1200). This allows all OSPF routes to be learned over
the link.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.29
Seitenansicht 298
1 2 ... 294 295 296 297 298 299 300 301 302 303 304 ... 414 415

Kommentare zu diesen Handbüchern

Keine Kommentare