Avaya Configuring IP Services Bedienungsanleitung Seite 245

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 415
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 244
Site Manager Parameters
114065 Rev. A A-29
Parameter: Checksum
Path: Configuration Manager > Protocols > IP > Interfaces
Default: On
Options: On
| Off
Function: Specifies whether UDP checksum processing is enabled on this interface.
Instructions: Select On to enable UDP checksum processing for the interface; all outgoing
and incoming UDP datagrams are subject to checksumming. You should select
On in virtually all instances. Select Off to disable UDP checksum processing
and provide backward compatibility with UNIX BSD 4.1.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.16
Parameter: MAC Address
Path: Configuration Manager > Protocols > IP > Interfaces
Default: None
Options: 0
| a user-specified MAC address | if the interface is on an SMDS circuit, the
entire E.164 address -- for example, C1 617 555 5000 FFFF
Function: Specifies a MAC (media access control) address for this IP interface. The IP
router will use its IP address and this MAC address when transmitting and
receiving packets on this interface.
Instructions: Enter 0 to configure the IP router to use its IP address and the circuit’s MAC
address when transmitting packets on this interface. Enter your own MAC
address to configure the IP router to use its IP address and the specified MAC
address when transmitting packets on this interface. If the interface is on an
SMDS circuit, by default, IP uses the SMDS-configured address. To configure
this parameter for a multinet or multigroup configuration, refer to Configuring
SMDS.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.17
Seitenansicht 244
1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 414 415

Kommentare zu diesen Handbüchern

Keine Kommentare