
Configuring IP Services
C-14 114065 Rev. A
Parameter: Import Peer AS
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Import
Filters
Default: 0
Options: 0 to 65535
Function: Identifies the autonomous system to which the BGP router at the remote end of
this BGP peer connection belongs. This filter will apply to updates from this
router. The value 0 means “any” AS.
Instructions: Enter the appropriate AS number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.14.1.7
Parameter: Import Peer Address
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Import Filters
Default: 0.0.0.0
Options: Any IP address
Function: Specifies the IP address of the interface on the remote side of this BGP peer
connection. This filter will apply to updates from this router. The value 0 means
“any” peer.
Instructions: Enter the IP address in dotted decimal notation. If the peer is in a remote AS, the
address must be on the same subnet as the local interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.14.1.8
Parameter: Import Originating AS
Path: Configuration Manager > Protocols > IP > Route Filters > BGP3 > Import
Filters
Default: 0
Options: 0 to 65535
Function: Specifies the AS from which the route originated (the last AS in the AS path).
The filter will apply to updates created by any routers in this AS. The value 0
means “any” AS.
Instructions: Enter the appropriate AS number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.14.1.9
Kommentare zu diesen Handbüchern