Avaya Configuring IP Services Bedienungsanleitung Seite 147

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 415
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 146
Customizing OSPF Services
114065 Rev. A 5-17
The hub of the star topology -- the BCN router in Figure 5-2 -- is configured
with a point-to-multipoint interface to the PVC and is set to be the OSPF
designated router in the network. The Router Priority parameter is set to a
value greater than 0.
Each spoke of the star -- the AN routers in Figure 5-2 -- is configured with a
point-to-multipoint interface to the PVC and is made ineligible to become the
designated router. The Router Priority parameter on each AN is set to 0.
When the spokes of the topology (the AN routers) are computing routes through
the other spokes, the next hop is forced to be the hub (the BCN router). The hub
can then forward the packet to the correct spoke.
Running OSPF with point-to-multipoint network interfaces addresses two
problems: how to minimize the number of subnets and how to minimize the
number of interfaces required to support communications within the star topology.
With point-to-multipoint interfaces, each star topology requires only one subnet,
rather than one subnet for each PVC. Also, the hub needs to support only one
interface for each star rather than one interface for each PVC. This reduces the
demand for resources on the router.
Specifying Router Priority for a Multiaccess Network
The router priority value is used in multiaccess networks (Broadcast, NBMA, or
point-to-multipoint) to elect the designated router.
A router with a priority of 0 is not eligible to become the designated router on this
particular network.
By default, each OSPF interface has a router priority of 1.
You can use Site Manager to
Specify a priority value for the interface
Make the router ineligible to be a designated router on this interface
Site Manager: Rtr Priority parameter: page A-79
Seitenansicht 146
1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 414 415

Kommentare zu diesen Handbüchern

Keine Kommentare