
show dcmmw
2-181
base
Displays the base record information for the DCM software subsystem. The table includes
the following information:
Application DCMMW (DCM middleware) software subsystem.
State State of the DCMMW software: Enabled or Disabled.
BootOption Indicates whether DCM boots from the boot image in its Flash
memory (LOCAL), or downloads an image in the DCM board’s
shared DRAM (DOWNLOAD).
ImgSaveMode Indicates whether DCM saves the boot image in shared memory to
the DCM board Flash memory (SAVE), or leaves it in RAM to be
lost at the next boot (NO_SAVE).
CfgOption Indicates whether DCM uses the configuration information in its
Flash memory (LOCAL), or a configuration file in the DCM
board’s shared DRAM (SHARED).
CfgSaveMode Indicates whether DCM saves configuration information currently
in RAM to the DCM board flash memory (WRITE), or leaves it in
RAM to be lost at the next boot (NO_WRITE).
RMONMaxHost Indicates the maximum number of host address entries in the
RMON Host Control table. This limit changes according to the
amount of memory available to DCM. If the table reaches the
maximum value, DCM deletes entries based on an LRU (least
recently used) algorithm.
RMONDfltHost Indicates whether DCM sets up the RMON Default Host table at
every boot (ENABLED), or lets an RMON application set up the
table (DISABLED). Some RMON network management
applications expect the DCM to set up a host configuration. Others
enable and disable their own configurations during normal
operations. Note that the DCM allows only one host table.
RMONDfltMtrix Indicates whether DCM sets up the RMON Matrix Control table at
every boot (ENABLED), or lets an RMON application set up the
table (DISABLED). Some RMON network management
applications expect the DCM to set up a matrix configuration.
Others enable and disable their own configurations during normal
operations. Note that the DCM allows only one matrix table.
Kommentare zu diesen Handbüchern