Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 107)

Customizing PVCs

308624-14.10 Rev 01

4-25

Using Site Manager

Using Site Manager, you can configure only the Committed Burst, the Excess

Burst, and the Throughput. To configure the normal, high, and low queue limits,

you must use the BCC, as described in “Normal, High, and Low Queue Limits

” on

page 4-22

To enable traffic shaping, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on a port configured for frame relay.

The Edit Connector window opens.

2. Click on

Edit Circuit

. The Frame Relay Circuit Definition

window opens.

3. Click on

Services

. The Frame Relay Service List window

opens.

4. Select the appropriate service record, and

click on

PVCs

The FR PVC List for Service window

opens.

5. Click on a PVC that you want to configure

for traffic shaping.

6. Set the following parameters:

• Committed Burst

• Excess Burst

• Throughput

Click on

Help

or see the parameter

descriptions beginning on page A-28.

7. Click on

Done

. You return to the Frame Relay Service

List window.

8. Click on

Done

. You return to the Frame Relay Circuit

Definition window.

9. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 245 246

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 107

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring Frame Relay Services