Avaya Configuring Frame Relay Services Bedienungsanleitung PDF herunterladen (Seite 98)

Configuring Frame Relay Services

4-16

308624-14.10 Rev 01

Congestion Control

Congestion control is disabled by default. To enable congestion control, navigate

to the frame-relay interface prompt (for example,

box; serial/1/2;

frame-relay/1/2

) and enter:

congestion-control enabled

Enabling this parameter tells the router to drop all outbound traffic destined for a

congested PVC until the congestion clears. The value of this parameter affects all

PVCs that you do not individually configure.

For example, the following command line enables congestion control for this

frame relay interface:

frame-relay/1/2#

congestion-control enabled

frame-relay/1/2#

Congestion Timer

To change the value for the congestion timer, navigate to the frame-relay prompt

for the interface (for example,

box; serial/1/2; frame-relay/1/2

) and enter:

congestion-timer

integer

is the length of time, in seconds, during which the router counts congestion

notifications. If the router receives the number of congestion notifications you set

in the congestion counter during this interval, the router stops transmitting data.

The value can be 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, or 5 seconds. The default is 1

second.

For example, the following command line sets a congestion timer

of 2.5 seconds:

frame-relay/1/2#

congestion-timer 2.5

frame-relay/1/2#

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 245 246

Keine Kommentare

Avaya Configuring Frame Relay Services Bedienungsanleitung Seite 98