
Issue 1 January 2008 23
Chapter 3: Network Requirements
Network Assessment
Perform a network assessment to ensure that the network will have the capacity for the
expected data and voice traffic, and that it can support for all applications:
● SIP,
● DHCP,
● HTTP/HTTPS, and
● Jitter buffers
Also, QoS support is required to run VoIP on your configuration. For more information, see
Appendix B:
Related Documentation and the QoS parameters L2QAUD, L2QSIG, DSCPAUD,
and DSCPSIG in Table 9:
Avaya Agent Deskphone 16CC Customizeable System Parameters.
Hardware Requirements
To operate properly, you need:
● Category 5e cables designed to the IEEE 802.3af-2003 standard, for LAN powering,
● TN2602 IP Media Processor circuit pack, for Avaya Communication Manager (CM). Sites
with a TN2302 IP Media Processor circuit pack are strongly encouraged to install a
TN2602 circuit pack.
● TN799C or D Control-LAN (C-LAN) circuit pack.
!
Important:
Important: Avaya IP and SIP telephone firmware requires TN799C V3 or greater C-LAN
circuit pack(s). For more information, see the Communication Manager Software
and Firmware Compatibility Matrix on the Avaya support Web site
http://www.avaya.com/support
.
To ensure that the appropriate circuit pack(s) are administered on your Communication
Manager call server, see Chapter 4:
Communication Manager Administration. For more
information about hardware requirements in general, see the Avaya Agent Deskphone 16CC
Installation and Maintenance Guide.
Kommentare zu diesen Handbüchern