
Dial Service Parameters
117353-B Rev. 00
A-63
Caller Resolution Info Parameters for Demand Circuit Groups
The caller resolution parameters for demand circuit groups contain the parameters
for the router to identify the remote router who is trying to make a connection.
Parameter: IPXWAN Enable
Path: Dialup >
Demand Circuit Groups
> Demand Circuit Groups
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables IPXWAN for this interface.
Instructions: Select Enable to enable IPXWAN for this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.12.1.13
Parameter: Bridge Enable
Path: Dialup >
Demand Circuit Groups
> Demand Circuit Groups
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables bridging for this interface.
Instructions: Select Enable to enable bridging for this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.12.1.10
Parameter: Caller Name
Path: Dialup > Demand Circuit Groups > Demand Circuit Groups >
Add
Group
>
Enter a Demand Pool >
OK
> Caller Resolution Info
Default: None
Options: Any text string; maximum 20 characters
Function: This name is part of the incoming call and informs the local router of the
remote router’s identity.
Instructions: Enter a text string no longer than 20 characters that identifies a remote router. If
you configure CHAP as the authentication protocol, enter the remote router’s
CHAP name. If you configure PAP, enter the remote router’s PAP ID.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.3.1.2
Kommentare zu diesen Handbüchern