Avaya Configuring Dial Services Bedienungsanleitung PDF herunterladen (Seite 127)

Creating Line Pools

4-49

Parameter: BRI T4 Timer

Default: 750 milliseconds

Range: 500 to 1000 milliseconds

Function: Indicates the amount of time the router waits for the line to recover from a

deactivated state. This timer prevents brief, minor disturbances on a noisy

line from forcing the router to deactivate the circuit. Instead, the router

waits to see if the line recovers within the T4 timer period. This enables

the router to suppress minor line problems from the upper-layer protocols.

Instructions: Enter a time limit that the router waits for the line to come back up before

deactivating the circuit. If your line is particularly noisy, enter the

maximum time for the router to wait for the line to reactivate.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.15

Modifying Line Pool Conﬁgurations

The sections that follow provide instructions for modifying your line pool

conﬁguration.

Changing a Line Pool

Before you can delete or change a pool ID, you must ﬁrst delete all circuits

associated with that pool. Refer to Chapter 5 for instructions.

To delete or change any line pool:

1. Select Dialup➔Demand, Backup, or Bandwidth-on-Demand Pools from

the Conﬁguration Manager window.

Site Manager displays the Pools window (refer to Figure 4-22).

— To change a pool ID, highlight the ID entry in the Pools window. Enter

the new pool ID in the Pool ID parameter and click on Apply. The new

pool ID appears in the Pools window.

— To delete a line pool, highlight the ID in the Pools window and click on

Delete. The pool is deleted from the router.

2. Click on Done in the Pools window when you ﬁnish modifying pool IDs.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 257 258

Keine Kommentare

Avaya Configuring Dial Services Bedienungsanleitung Seite 127