Avaya Configuring Dial Services Bedienungsanleitung PDF herunterladen (Seite 79)

4-1

Chapter 4

Creating Line Pools

This chapter provides instructions on how to create demand, backup, and

bandwidth-on-demand line pools. The conﬁguration procedures for creating line

pools are similar for all three dial services. To avoid repetition, this chapter shows

only the dial-on-demand configuration windows as examples. For dial backup or

bandwidth-on-demand pools, the window may have a different title, but the

procedure is the same.

This chapter assumes you have read Conﬁguring Routers and that you have

1. Opened a conﬁguration ﬁle

2. Speciﬁed router hardware if this is a local mode conﬁguration ﬁle

3. Selected the link or net module connector that you are enabling for dial

services (dial backup or bandwidth-on-demand only).

For dial backup and bandwidth-on-demand, select a connector on a link or net

module and conﬁgure a leased line before going to the Dialup option on the

Conﬁguration Manager main menu (Figure 4-1). (Refer to Conﬁguring

Routers for instructions.) Later, you will designate these circuits as dial

backup primary circuits or bandwidth-on-demand circuits.

For dial-on-demand, you go directly to the Dialup option without selecting a

link or net module connector.

To conﬁgure a line pool you

1. Deﬁne pool IDs.

2. Select one or more lines to include in each pool.

3. Conﬁgure the signaling method or service for each line (Raise DTR, V.25bis,

or ISDN).

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 257 258

Keine Kommentare

Avaya Configuring Dial Services Bedienungsanleitung Seite 79