Avaya Configuring IP Services Bedienungsanleitung PDF herunterladen (Seite 244)

100

101

Configuring IP Services

5-40

Parameter: Peer RS Mode

Default: None

Options: None | Client | Internal | External

Function: Indicates the route server mode of the BGP peer.

Instructions: If the peer is not a route server or an RS client, use the default, None. If

the peer is an RS client, specify Client. If the peer is a route server in the

same cluster, specify Internal. If the peer is a route server in a different

cluster, specify External.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.35

Editing a BGP Peer Relationship

To edit a BGP peer, begin at the BGP Peer List window shown in Figure 5-10, and

complete the following steps:

1. Click on the peer for which you want to edit parameters.

When you do this, all of the parameters shown at the bottom of the window

will reﬂect the current values for the peer you selected.

2. Edit those parameters you want to change.

The BGP peer parameters that you can edit are described following these

instructions.

3. Click on Apply to implement your changes.

4. Repeat Steps 1 through 3 to edit any other peers you want to change;

remember to click on Apply each time.

5. Click on Done to exit the window.

Note: You cannot reconﬁgure the Local Address or Peer Address parameters

for a BGP peer. To change these parameters, you must delete the peer and add

a new peer with the proper information. See “Deleting a BGP Peer” on page

5-47 for instructions.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 465 466

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring IP Services Bedienungsanleitung Seite 244

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya Configuring IP Services