Avaya Configuring IP Services Bedienungsanleitung PDF herunterladen (Seite 89)

100

101

Configuring IP Routers and Interfaces

2-61

Parameter: Maximum Policy Rules

Default: 32

Range: Any integer

Function: Speciﬁes the maximum number of policy rules that can be conﬁgured per

policy type (Accept or Announce) per protocol.

Instructions: To conﬁgure more than 32 Accept or Announce policy rules for a

protocol, you must set this parameter to a larger value. IP will round the

value up to the next multiple of 32.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.15

Parameter: Route Filter Support

Default: Enable

Options: Enable | Disable

Function: Speciﬁes whether or not IP supports route ﬁlters.

Instructions: If you do not require support for route ﬁlters, select Disable. Otherwise,

use the default.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.16

Deleting IP from an Interface

To delete IP from an interface on which it is currently conﬁgured, begin at the

Conﬁguration Manager window (Figure 2-9) and proceed as follows:

1. Click on the connector from which you want to delete IP services.

2. Click on Edit Circuit.

3. Select Protocols➔Add or Delete.

The Select Protocols window opens. The IP button is highlighted to show that

IP is enabled on the circuit.

4. Click on IP to deselect it.

5. Click on OK to exit the window.

6. Select File➔Exit to exit the Circuit Deﬁnition window and return to the

Conﬁguration Manager window.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 465 466

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring IP Services Bedienungsanleitung Seite 89

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya Configuring IP Services