Avaya Configuring IP Services Bedienungsanleitung PDF herunterladen (Seite 428)

100

101

Configuring IP Services

10-44

Parameter: Metric

Default: 0 (0 = the actual route cost as learned)

Range: 0 to 255

Function: Assigns an EGP cost to the propagated route. The value 0 causes the

actual route cost (as learned) to be used.

Instructions: Either accept the default metric value, 0, or enter a new value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.13.1.11

Editing an EGP Export Route Filter

You can edit Enable, Action, Interface, and Metric parameters for an EGP export

route ﬁlter.

To edit the EGP export route ﬁlter parameters, begin at the EGP Export Route

Filters List window and proceed as follows:

1. Click on the export route ﬁlter you want to edit.

2. Click on Edit.

The EGP Export Route Filter window for that ﬁlter opens.

3. Edit those parameters you want to change.

All EGP export route ﬁlter parameters are described in “EGP Export Route

Filter Parameter Descriptions” on page 10-40.

4. Click on OK to implement your changes.

Deleting an EGP Export Route Filter

To delete an EGP export route ﬁlter, begin at the EGP Export Route Filters List

window and proceed as follows:

1. Click on the EGP export route ﬁlter you want to delete.

2. Click on Delete to delete the export route ﬁlter.

Note: You cannot edit the Export Address, Export Mask, Export From

Protocol, Export from Peer, Export OSPF Type or Export OSPF Tag

parameters for an EGP export route ﬁlter. To change these parameters, you

must delete the ﬁlter and add a new ﬁlter with the proper information. See

“Deleting an EGP Export Route Filter” on page 10-44 for instructions.

1 2 ... 423 424 425 426 427 428 429 430 431 432 433 ... 465 466

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring IP Services Bedienungsanleitung Seite 428

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya Configuring IP Services