Avaya Configuring IP Services Bedienungsanleitung PDF herunterladen (Seite 93)

100

101

Configuring IP Routers and Interfaces

2-65

4. Click on Done to exit the window.

Static Route Parameter Descriptions

Use the following descriptions to set parameters on the IP Static Routes and IP

Conﬁguration (for static routes) windows.

Parameter: Enable

Default: This parameter defaults to Enable when you conﬁgure the static route.

Options: Enable | Disable

Function: Speciﬁes the state (active or inactive) of the static route record in the IP

routing tables.

Instructions: Select Disable to make the static route record inactive in the IP routing

table; the IP router will not consider this static route. Select Enable to

make the static route record active again in the IP routing table.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.2

Parameter: Destination IP Address

Default: None

Options: Any valid IP network address

Function: Speciﬁes the IP address of the network to which you want to conﬁgure the

static route. Speciﬁes a supernet for which you want to conﬁgure a black

hole static route.

Instructions: Enter the destination IP address in dotted decimal notation. To conﬁgure a

default route, enter 0.0.0.0. To conﬁgure a black hole static route, enter a

supernet address. You can conﬁgure up to 12 static routes to the same

destination.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.3

Note: You cannot reconﬁgure the Destination IP Address or Address Mask

parameters for a static route. To change these parameters, you must delete the

static route and add a new route with the proper information. See “Deleting a

Static Route” on page 2-68 for instructions.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 465 466

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring IP Services Bedienungsanleitung Seite 93

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya Configuring IP Services