Avaya Configuring IP Services Bedienungsanleitung PDF herunterladen (Seite 82)

Configuring IP Services

2-54

Parameter: Enable

Default: This parameter defaults to Enable when you add IP support to a circuit.

Options: Enable | Disable

Function: Speciﬁes the state of the IP router software.

Instructions: Select Enable if you have previously disabled the IP router software and

now wish to re-enable it. Select Disable to disable the IP router software.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.2

Parameter: Forwarding

Default: Forwarding

Options: Forwarding | Not Forwarding

Function: Speciﬁes whether the IP router forwards IP trafﬁc that is not explicitly

addressed to it.

Instructions: Select Forwarding if you want the IP router to route (forward) IP trafﬁc.

Forwarding conﬁgures the IP router to process all broadcast packets and

all IP packets explicitly addressed to it, and to route all other IP packets.

Select Not Forwarding if you want to provide IP management access (by

means of TFTP and SNMP) to all active IP interfaces but also want to

prohibit the IP router from forwarding IP trafﬁc. You must specify an

identical IP address and mask combination for each active IP interface

that will provide management access. Not Forwarding conﬁgures the IP

router to act as an IP host; it does not forward IP trafﬁc, but it still

processes packets explicitly addressed to it. In Not Forwarding mode,

only static routes and adjacent-host routes are allowed. No routing

protocols are initiated.

Because the IP router does not forward IP trafﬁc in Not Forwarding mode,

you must conﬁgure the router to bridge IP trafﬁc not explicitly addressed

to it. You must conﬁgure the bridge for each circuit that conveys IP

datagrams. The bridge will then forward all IP datagrams that are not

explicitly addressed to the router.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.4

Note: In dynamic mode, when you set this parameter to Disable, you

immediately prohibit all Site Manager communication with the router.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 465 466

Keine Kommentare

Avaya Configuring IP Services Bedienungsanleitung Seite 82