Avaya BCM 2.0 Programming Betriebsanweisung Seite 431

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 446
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 430
Glossary 431
P0911588 Issue 01 Enterprise Edge Programming Operations Guide
subnet mask
A value used to route packets on TCP/IP networks. When the IP layer has to deliver
apacket throughan interface, it uses the destination addresscontained in the packet,
together with the subnet mask of the interface to select an interface, and the next
hop in that subnet
synchronous
A synchronous signal is sourced from the same timing reference. A synchronous
signal causes the interval between successive bits, characters, or events to remain
constant or locked in to a specific clock frequency.
system data
Anoptionin the Set Copyfunction.SystemDatareferstothe programmable system
settings that apply to all telephones and lines.
System programming
A programming section that lets you assign and maintain certain settings on the
Enterprise Edge system.
System speed dial code
A two-digit code (01 to 70) that can be programmed to dial a telephone number up
to 24 digits long. System speed dial codes are programmed for the entire system
under the System Speed programming heading.
System Startup
See Startup programming.
T
T1
Digital carrier system or line that carries data at 1.544 Mbps.
TAPI
See Telephony Application Program Interface.
Target lines
Lines used to answer incoming calls only. A target line routes a call according to
digits it receives from an incoming trunk. They are referred to by line numbers in
the same way as physical lines.
TCP/IP
See Transmission Control Protocol/Internet Protocol.
Seitenansicht 430
1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 445 446

Kommentare zu diesen Handbüchern

Keine Kommentare