Avaya Configuring WAN Line Services Bedienungsanleitung PDF herunterladen (Seite 63)

Configuring Synchronous Services

117345-B Rev. 00

2-29

The lower the number, the higher the priority. For example, the router uses a line

of priority 1 before it uses a line of priority 2.

Set the priority for the interface.

Using Site Manager

See the Sync Priority parameter on page A-72 for information.

Setting the Hold Down Time

On a synchronous interface configured for dial services, you can specify a time

period (0 to 9999 seconds) for the router to wait before bringing down a backup

line. This delay allows time for the primary line to fully recover before

deactivating the backup line.

For a dial-on-demand interface, the Hold Down Time parameter is set to 3 seconds

by default.

For other interfaces, the Hold Down Time parameter is set to 0 by default. Set this

parameter to a value from 0 to 9999 seconds.

Using the BCC

hold-down-time

variable

For example:

sync/4/1# hold-down-time 0

Using Site Manager

See the Hold Down Time parameter on page A-69 for information.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 293 294

Keine Kommentare

Avaya Configuring WAN Line Services Bedienungsanleitung Seite 63