Avaya Configuring WAN Line Services Bedienungsanleitung Seite 97

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 294
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 96
Configuring HSSI Services
117345-B Rev. 00
5-5
Setting the BofL Interval
The BofL Frequency parameter is valid only if BofL is enabled on the interface.
After sending a BofL message, the router starts a timer that has a value equal to
five times the setting of this parameter. If the router does not receive a BofL
message from the remote peer before the timer expires, the router disables the
HSSI circuit, and then attempts to restart it.
Both ends of the point-to-point connection must be configured with the same
frequency value.
Set the BofL Frequency parameter to a value from 1 to 60 seconds. The default is
1 second.
Using the BCC
bofl-timeout
integer
For example:
hssi/2/1# bofl-timeout 20
Using Site Manager
See the BofL Frequency parameter on page A-14 for information.
Setting the MTU
The default buffer size, or maximum transmission unit (MTU), determines the
largest frame that can travel across the HSSI interface.
The default value is 4608 bytes. Specify an MTU from 3 to 4608 bytes on this
interface.
Using the BCC
mtu
integer
For example:
hssi/2/1# mtu 2000
Seitenansicht 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 293 294

Kommentare zu diesen Handbüchern

Keine Kommentare