
Site Manager Line Services Parameters
114078 Rev. A A-13
Parameter: MAC Address Select
Path: TOKEN Connector > Edit Line > Edit Token Ring Parameters
Default: PROM
Options: BOXWIDE
| PROM | CNFG
Function: Determines the source of the MAC address.
Instructions: Enter BOXWIDE if you want the Token Ring interface to use a MAC address
that the software generates from the router’s serial number.
Enter PROM if you want the Token Ring interface to use a MAC address from
programmable read-only memory on the Token Ring link module.
Enter CNFG if you explicitly assigned a MAC address with the MAC Address
Override parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.4.2.1.10
Parameter: Speed
Path: TOKEN Connector > Edit Line > Edit Token Ring Parameters
Default: 16 Mb/s
Options: 16 Mb/s
| 4 Mb/s
Function: Specifies the speed of the Token Ring media. If you select 16 Mb/s, the router
enables the Early Token Release protocol, which is used extensively on 16-Mb/s
media. In the unlikely event that you want to disable Early Token Release over
16-Mb/s Token Ring media, you can do so with the Early Token Release
parameter.
Instructions: Enter the ring speed.
MIB Object ID: 1.3.6.1.4.1.18.3.4.2.1.11
Parameter: Early Token Release
Path: TOKEN Connector > Edit Line > Edit Token Ring Parameters
Default: Enable
Options: Enable
| Disable
Function: Indicates whether the token can return to the ring before the recipient copies all
data. This parameter is valid only when you set the Speed parameter to 16 Mb/s.
Instructions: Accept the current value.
MIB Object ID: 1.3.6.1.4.1.18.3.4.2.1.12
Kommentare zu diesen Handbüchern