
Site Manager Line Services Parameters
114078 Rev. A A-61
Parameter: Retry Timer
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: 300 tenths of a second (3 seconds)
Options: 1 to 99999 tenths of a second
Function: Indicates the time the router waits for a response from the link. The router sends
Link Control frames when this timer expires, resends the frames up to the value
of the Retry Count parameter, and then disconnects the link.
Instructions: Enter a timeout value in tenths of seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.21
Parameter: Extended Address
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: Disable
Options: Enable
| Disable
Function: Enables or disables testing of the address length. When you set this parameter to
Enable, the router tests the first bit of the address to determine the length of the
address, in octets.
Instructions: Accept the default, or select Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.22
Parameter: Extended Control (S and I frames)
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: Disable
Options: Enable
| Disable
Function: Allows the control fields of all S- and I- frames to become two octets in length
instead of one. Numbering of all I-frames becomes Modulo 128 instead of
Modulo 8.
Instructions: Accept the default or select Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.24
Kommentare zu diesen Handbüchern