
Site Manager Line Services Parameters
114078 Rev. A A-15
Parameter: MTU
Path: COM Connector > Edit Line > Edit Asynchronous Parameters
Default: 1000 bytes
Options: 3 to 1580 bytes
Function: Specifies the largest frame (Maximum Transmission Unit) that the router can
transmit via the Transmission Control Protocol (TCP).
Instructions: Specify a value in the range 3 to 1580.
MIB Object ID: 1.3.6.1.4.1.18.3.4.3.1.7
Parameter: Start Protocol
Path: COM Connector > Edit Line > Edit Asynchronous Parameters
Default: Answer
Options: Loop
| Originate | Answer
Function: Specifies the start mode for the ASYNC TCP connection.
Instructions: Select Answer to advise local TCP to wait for a connection request.
Select Originate to advise local TCP to initialize a connection to the specified
remote IP address.
Select Loop to perform asynchronous cable testing.
MIB Object ID: 1.3.6.1.4.1.18.3.4.3.1.9
Parameter: Remote IP Addr
Path: COM Connector > Edit Line > Edit Asynchronous Parameters
Default: None
Options: Any valid 32-bit IP address in dotted decimal notation
Function: Specifies a remote TCP host to which this router will communicate using
ASYNC. The remote IP address is used only when the Start Protocol parameter
is set to Originate.
Instructions: Enter a valid IP address in dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.4.3.1.26
Kommentare zu diesen Handbüchern