Avaya Configuring Line Services Bedienungsanleitung Seite 211

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 301
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 210
Configuring Line Services
A-24 114078 Rev. A
Parameter: Interface MTU
Path: ATM Connector > Line Attributes > ATM/ALC Parameters
Default: 4608 octets
Options: 1 to 9188 octets
Function: Specifies the largest packet size that the router can transmit on this interface.
Instructions: Enter a value that is appropriate for the network.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.2.1.1.2
Parameter: Data Path Enable
Path: ATM Connector > Line Attributes > ATM/ALC Parameters
Default: Enable
Options: Enable
| Disable
Function: Specifies whether or not the router disables the interface between the driver and
the higher-level software (the data path interface) if you disconnect the cable
from the ATM module.
If you select Enable, when you disconnect the cable from the ATM, the router
disables the data path interface after the time you specify with the Data Path
Notify Timeout parameter.
If you select Disable, the router does not disable the data path interface when
you disconnect the cable from the ATM module.
Instructions: Select Enable or Disable. If you select Enable, be sure to enter an appropriate
value for the Data Path Notify Timeout parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.2.1.1.14
Parameter: Data Path Notify Timeout
Path: ATM Connector > Line Attributes > ATM/ALC Parameters
Default: 1 second
Options: 0 to 3600 seconds
Function: Defines the time the router waits before disabling the data path interface when
you disconnect the cable from the ATM module, providing that you set the Data
Path Enable parameter to Enable.
Instructions: Accept the default or enter an appropriate time value.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.2.1.1.15
Seitenansicht 210
1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 300 301

Kommentare zu diesen Handbüchern

Keine Kommentare