Avaya Configuring Line Services Bedienungsanleitung Seite 217

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 301
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 216
Configuring Line Services
A-30 114078 Rev. A
Parameter: MTU
Path: HSSI Connector > Edit Line > Edit HSSI Parameters
Default: 4608 bytes
Options: 3 to 4608 bytes
Function: Specifies the buffer size (the Maximum Transmission Unit) for the HSSI port
and, therefore, determines the largest frame that can travel across the HSSI port.
Instructions: Set this parameter to a value appropriate for your network.
MIB Object ID: 1.3.6.1.4.1.18.3.4.7.1.9
Parameter: WAN Protocol
Path: HSSI Connector > Edit Line > Edit HSSI Parameters
Default: None
Options: Standard
| PassThru | PPP | SMDS | Frame Relay | ATM DXI
Function: Indicates which WAN protocol you enabled on this HSSI circuit.
Instructions: Accept this setting. Changing the protocol here will not reconfigure the
interface.
MIB Object ID: 1.3.6.1.4.1.18.3.4.7.1.12
Parameter: Transmission Interface
Path: HSSI Connector > Edit Line > Edit HSSI Parameters
Default: DS3
Options: DS1
| DS3
Function: Specifies the appropriate MIB for the local management interface (LMI) to use,
as long as you enable LMI and configure SMDS or Frame Relay across the
HSSI interface. The HSSI driver provides no support for either the DS1 or DS3
MIB. Rather, the external DCE (for example, a DL3200 SMDS CSU/DSU from
Digital Link) may provide MIB support.
Instructions: Select a DS1 MIB (specified by RFC 1232) or a DS3 MIB (specified by RFC
1233) depending on the carrier services the attached DCE device provides (DS1
at 1.54 MB/s, or DS3 at 44.736 MB/s).
MIB Object ID: 1.3.6.1.4.1.18.3.4.7.1.13
Seitenansicht 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 300 301

Kommentare zu diesen Handbüchern

Keine Kommentare