
Configuring Line Services
A-18 114078 Rev. A
Parameter: TCP Inactive Limit
Path: COM Connector > Edit Line > Edit Asynchronous Parameters
Default: 300 seconds
Options: -65536 to 65535 seconds
Function: Specifies the maximum inactivity timer in seconds. When the inactive limit
timer expires, the TCP connection between the router and the remote TCP host
is lost. This parameter works with the TCP KeepAlive parameter.
To prevent a TCP connection loss, set this parameter to a value that allows
enough time for multiple TCP keepalive messages and ACKs from the remote
TCP host. Refer to the TCP KeepAlive parameter for information. If the port is
listening (TCP KeepAlive) for an incoming connection, you can specify a
negative value for this parameter to mark the connection as inactive and defer
resetting the connection until a connection request is received.
Instructions: Enter a value in the range -65536 to 65535 or accept the default value (300).
MIB Object ID: 1.3.6.1.4.1.18.3.4.3.1.36
Parameter: Cfg TxQ Length
Path: COM Connector > Edit Line > Edit Asynchronous Parameters
Default: None
Options: 1 to 255 bytes
Function: Specifies the maximum transmit queue length in bytes. This parameter reduces
the size of the driver transmit queue if the transmit queue is larger than the value
of this parameter.
Instructions: Enter a value in the range 1 to 255.
MIB Object ID: 1.3.6.1.4.1.18.3.4.3.1.37
Kommentare zu diesen Handbüchern